Inductive Sensors

BI1.5-EG08-Y1-H1341/S100

Inductive Sensor, With Increased Temperature Range, Rated switching distance 1.5 mm, Flush, Threaded barrel, M8 x 1, Stainless steel, 1.4427 SO, Temperatures up to +100 °C, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), M12 x 1 male connector, ATEX category II 1 G, Ex-zone 0 for temperatures up to +80 °C, ATEX category II 2 G. Ex-zone 1, ATEX category II 1 D, Ex-zone 20 for temperatures up to +70 °C, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, S

Turck

NI10-EM18-Y1X-H1141

Inductive Sensor, Rated switching distance 10 mm, Non-flush, Threaded barrel, M18 x 1, Stainless steel, 1.4301, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), M12 x 1 male connector, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck

BI1.5-EG08K-RN6X

Inductive Sensor, Rated switching distance 1.5 mm, Cable length (L) 2 m, Flush, M8 × 1 threaded tube, Stainless steel, 1.4305 (AISI 303), DC 3-wire, 10…30 VDC, NC contact, NPN output, Cable connection

Turck

BI1.5-H6.5-Y1

Inductive Sensor, Rated switching distance 1.5 mm, Cable length (L) 2 m, Flush, Ø 6.5 mm, smooth barrel, Stainless steel, 1.4404, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck

BI5-EG18F-AP6X-H1141/S1589

Inductive Sensor, Stainless Steel Front, Rated switching distance 5 mm, Flush, M18 × 1 threaded barrel, Stainless steel, 1.4305, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

Turck

BI2-S12-AP6X

Inductive Sensor, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, Threaded barrel, M12 x 1, Plastic, PA12‐GF30, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

NI3-EH6.5K-AN6X

Inductive Sensor, Rated switching distance 3 mm, Cable length (L) 2 m, Non-flush, Smooth barrel, Ø 6.5 mm, Stainless steel, 1.4305 (AISI 303), DC 3-wire, 10…30 VDC, NO contact, NPN output, Cable connection

Turck

NI3-M08K-AN6X

Inductive Sensor, With Increased Switching Distance, Rated switching distance 3 mm, Cable length (L) 2 m, Non-flush, Threaded barrel, M8 x 1, Nickel-plated brass, Large sensing range, DC 3-wire, 10…30 VDC, NO contact, NPN output, Cable connection

Turck

BI20U-CP40-AP6X2-H1141

Inductive Sensor, With Extended Switching Distance, Rated switching distance 20 mm, Flush, Rectangular, height 40 mm, Variable orientation of active face in 9 directions, Plastic, PBT‐GF30‐V0, High luminance corner LEDs, Optimum view on supply voltage and switching state from any position, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large coverage, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

Turck

NI4-DSU26-2AP4X2-H1141

Inductive Sensor, For Rotary Actuators, Rated switching distance 4 mm, Non-flush, Rectangular, housing DSU26, Plastic, PP-GF30-VO, Two outputs for monitoring the position of rotary actuators, Mounting on all standard actuators, 2 x NO contact, PNP output, DC 4-wire, 10…65 VDC, M12 x 1 male connector

Turck

BI4-G12K-AP6X/S1589

Inductive Sensor, With Increased Switching Distance, Rated switching distance 4 mm, Cable length (L) 2 m, Flush, Threaded barrel, M12 x 1, Chrome-plated brass, Large sensing range, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI20-Q20-AN45X2LD-H1141

Inductive Sensor, For Use in Vehicle Board Nets, Rated switching distance 20 mm, Flush, Rectangular, height 20 mm, Active face on top, Plastic, PBT-GF30-V0, For vehicle board nets, 12 V and 24 V, Increased interference immunity 100 V/m radiated acc. ISO 11452-4 and 100 mA BCI acc. to ISO 11452-2, Load-dump protection acc. to DIN ISO 7637-2 (SAE J 113-11), Extended temperature range, High protection class IP68/IP69K, Protection against salt spray and rapid temperature change, Laser engraved label

Turck

BI5-M18-AP6X/S120

Inductive Sensor, With Increased Temperature Range, Rated switching distance 5 mm, Cable length (L) 2 m, Flush, Threaded barrel, M18 x 1, Chrome-plated brass, S120 = Temperatures up to +120 °C, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI5U-G18-RDZ30X2-B3331

Inductive Sensor, Rated switching distance 5 mm, Flush, Threaded barrel, M18 x 1, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, AC 2-wire, 20…250 VAC, DC 2-wire, 10…300 VDC, NC contact, 1/2" male connector

Turck

NI5-S12-AN5X/5

Inductive Sensor, Rated switching distance 5 mm, Cable length (L) 2 m, Non-flush, Threaded barrel, M12 x 1, Plastic, PA12‐GF30, DC 3-wire, 4.75…5.25 VDC, NO contact, NPN output, TTL compatible, Cable connection

Turck

BI8-EM18-VP45XLD-H1141

Inductive Sensor, For Use in Vehicle Board Nets, Rated switching distance 8 mm, Flush, Threaded barrel, M18 x 1, Stainless steel, 1.4301, For vehicle board nets, 12 V and 24 V, Increased interference immunity 100 V/m radiated acc. ISO 11452-4 and 100 mA BCI acc. to ISO 11452-2, Load-dump protection acc. to DIN ISO 7637-2 (SAE J 113-11), Extended temperature range, High protection class IP68/IP69K, Protection against salt spray and rapid temperature change, Laser engraved label, permanently legib

Turck

BI3U-M12E-VP4X-H1141

Inductive Sensor, Rated switching distance 3 mm, Flush, M12 × 1 threaded barrel, Long version, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 4-wire, 10…65 VDC, Changeover contact, PNP output, M12 x 1 male connector

Turck

NI40F-

Inductive Sensor, Probe, , Rectangular, height 32 mm, Plastic, ABS

Turck

BI3U-M12E-AP6X

Inductive Sensor, Rated switching distance 3 mm, Cable length (L) 2 m, Flush, M12 × 1 threaded barrel, Long version, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

NI3-EG08K-RP6X-V1131

Inductive Sensor, Rated switching distance 3 mm, Non-flush, M8 × 1 threaded barrel, Stainless steel, 1.4305 (AISI 303), DC 3-wire, 10…30 VDC, NC contact, PNP output, M8 x 1 male connector

Turck