3273992 Phoenix Contact Terminal Blocks
Part#:3273992
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 2
May 2, 2024
About the product: Distribution block, bridged internally, nom. voltage: 450 V, nominal current: 32 A, connection method: Push-in connection, Push-in connection, number of connections: 7, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 27.9 mm, height: 22.7 mm, color:
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273992 Phoenix Contact price in the box on the right side or send a quick quote.
3273992 Product Details
- Test duration per axis 5 h
- Nominal cross section 4 mm²
- Overvoltage category III
- Maximum total current 63 A
- Back of the hand protection guaranteed
- Oscillation, broadband noise test result Test passed
- Number of connections 7
- Insulating material PA
- Nominal current IN 57 A
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- ASD level 6.12 (m/s2)2/Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Flammability rating according to UL 94 V0
- Degree of pollution 3
- Open side panel No
- Result of thermal test Test passed
- Acceleration 30g
- Number of shocks per direction 3
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Length 28.6 mm
- Stripping length 12 mm ... 14 mm
- Conductor cross section AWG min. 20
- Conductor cross section flexible max. 10 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 10 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 9.0 27141120
- Number of levels 1
- Color red
- Maximum load current 57 A
- Insulating material group I
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Test spectrum Service life test category 2, bogie-mounted
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Shock test result Test passed
- Shock duration 18 ms
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Connection method Push-in connection
- Conductor cross section solid max. 16 mm²
- Max. AWG conductor cross section, flexible 8
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 4 mm²
- Value 1 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 6.0 27141100
- Nominal cross section feed-in 10 mm²
- Rated surge voltage 6 kV
- Nominal voltage UN 450 V
- Finger protection guaranteed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Static insulating material application in cold -60 °C
- Height 22.7 mm
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Conductor cross section AWG max. 6
- Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm²
- Operating temperature -35 °C ... 105 °C (max. short-term operating temperature 130°C)
- Connection Feed-in stage
- ETIM 6.0 EC000897
- ECLASS 7.0 27141120
- Shock form Half-sine
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Connection in acc. with standard IEC 60998-2-2
- Min. AWG conductor cross section, flexible 20
- Connection cross sections directly pluggable 0.5 mm² 16 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 11.0 27141120
- Width 27.9 mm
- Conductor cross section solid min. 0.5 mm²
- Conductor cross section flexible min. 0.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Internal cylindrical gage A4
- ECLASS 10.0.1 27141120
- ETIM 7.0 EC000897
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$4.93
3273992
Stock:
2
Select Qty:
$4.93
$4.93 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨