3273112 Phoenix Contact Terminal Blocks

3273112 Product Details

• Number of levels
  1
• Nominal cross section
  2.5 mm²
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Number of connections
  19
• Degree of pollution
  3
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 35
• Conductor cross section short circuit testing
  10 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Length
  58.1 mm
• Height NS 15
  30.4 mm
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
690 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Short-time current
1.2 kA
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Value
1 mm²
ECLASS 4.0
27141121
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Nominal cross section feed-in
6 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Open side panel
No
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
UNSPSC 20.0
39121410
Color
blue
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Rated surge voltage
8 kV
Bending test turns
135
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 3.0
EC000897
ETIM 6.0
EC000897
Overvoltage category
III
Tensile test result
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
28.6 mm
Connection in acc. with standard
IEC 60947-7-1
Height NS 35/7,5
32.4 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.5 mm²
Connection
Feed-in stage
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid min.
1 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ECLASS 9.0
27141120
UNSPSC 12.01
39121410

Product condition