3273048 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  8 kV
• Insulating material group
  I
• Maximum total current
  48 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Result of temperature-rise test
  Test passed
• Result of aging test
  Test passed
• Test duration per axis
  5 h
• ASD level
  6.12 (m/s2)2/Hz
• Shock duration
  18 ms
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/7,5
  32.4 mm
• Conductor cross section solid min.
  0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Bending test turns
135
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
Number of connections
18
Color
red
Insulating material
PA
Overvoltage category
III
Maximum load current
32 A
Open side panel
No
Nominal voltage UN
690 V
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
30.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 11
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Potentials
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal current IN
24 A
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
58.1 mm
Width
28.6 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03