3273374 Phoenix Contact Terminal Blocks

3273374 Product Details

• Number of levels
  1
• Number of connections
  19
• Flammability rating according to UL 94
  V0
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• ASD level
  6.12 (m/s2)2/Hz
• Shock duration
  18 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  56.5 mm
• Conductor cross section solid max.
  10 mm²
• Conductor cross section flexible max.
  10 mm²
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Color
  gray
• Degree of pollution
  3
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Open side panel
  No
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
ECLASS 5.1
27141120
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Nominal cross section
2.5 mm²
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section solid min.
1 mm²
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
450 V
Test spectrum
Service life test category 2, bogie-mounted
Result of thermal test
Test passed
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
21.7 mm
Conductor cross section AWG max.
8
Internal cylindrical gage
A3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Nominal cross section feed-in
6 mm²
Overvoltage category
III
Rated surge voltage
6 kV
Nominal current IN
41 A (with 6 mm² conductor cross section)
Back of the hand protection
guaranteed
Finger protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
28.6 mm
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
20
Conductor cross section AWG min.
20
Connection cross sections directly pluggable
1 mm² 10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
Value
1 mm²
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
ECLASS 4.1
27141121
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
UNSPSC 20.0
39121410
Max. AWG conductor cross section, flexible
10
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 9.0
27141120
UNSPSC 11
39121410

Product condition