3273206 Phoenix Contact Terminal Blocks
Part#:3273206
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 660
Nov 21, 2024
Distribution block, Block with horizontal alignment and integrated supply, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 690 V, nominal current: 24 A, connection metho
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273206 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of levels 1
- Nominal cross section feed-in 6 mm²
- Rated surge voltage 8 kV
- Nominal voltage UN 690 V
- Potentials 1
- Flammability rating according to UL 94 V0
- Insulating material PA
- Insulating material group I
- Result of surge voltage test Test passed
- Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
- Tight fit on carrier NS 35
- Result of voltage-drop test Test passed
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Shock test result Test passed
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Length 45.7 mm
- Stripping length 10 mm ... 12 mm
- Conductor cross section solid max. 10 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Max. AWG conductor cross section, flexible 10
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 11.0 27141120
- ECLASS 4.0 27141121
- ECLASS 6.0 27141100
- ETIM 7.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- Nominal cross section 2.5 mm²
- Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Nominal current IN 41 A (with 6 mm² conductor cross section)
- Result of power-frequency withstand voltage test Test passed
- Setpoint 5 N
- Short circuit stability result Test passed
- Result of aging test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Number of connections 7
- Degree of pollution 3
- Maximum total current 57 A (with 10 mm² conductor cross section)
- Back of the hand protection guaranteed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Bending test turns 135
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Conductor cross section short circuit testing 10 mm²
- Acceleration 30g
- Number of shocks per direction 3
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Width 25.6 mm
- Connection method Push-in connection
- Conductor cross section AWG max. 8
- Min. AWG conductor cross section, flexible 20
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- Connection Feed-in stage
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 4.1 27141121
- ECLASS 9.0 27141120
- ETIM 3.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- UNSPSC 19.0 39121410
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Color green
- Overvoltage category III
- Maximum load current 57 A (with 10 mm² conductor cross section)
- Finger protection guaranteed
- Bending test rotation speed 10 rpm
- Tensile test result Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 18 ms
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 35/7,5 30.9 mm
- Conductor cross section solid min. 1 mm²
- Conductor cross section flexible min. 0.5 mm²
- Conductor cross section flexible max. 10 mm²
- Connection cross sections directly pluggable 1 mm² 10 mm²
- Internal cylindrical gage A3
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 10.0.1 27141120
- ECLASS 7.0 27141120
- ETIM 6.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 12.01 39121410
- Open side panel No
- Power frequency withstand voltage setpoint 1.89 kV
- Result of flexion and pull-out test Test passed
- Result of tight fit on support Test passed
- Short-time current 1.2 kA
- Ageing test for screwless modular terminal block temperature cycles 192
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Shock form Half-sine
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section AWG min. 20
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- Value 1 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 5.0 27141120
- ECLASS 5.1 27141120
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 21.0 39121410
- Proof of thermal characteristics (needle flame) effective duration 30 s
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$3.43
Stock:
660
Select Qty:
$3.43
$3.43 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨