3273122 Phoenix Contact Terminal Blocks

3273122 Product Details

• Finger protection
  guaranteed
• Nominal cross section feed-in
  6 mm²
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Number of connections
  19
• Color
  white
• Nominal voltage UN
  690 V
• Back of the hand protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Connection method
  Push-in connection
• Conductor cross section AWG min.
  20
• Max. AWG conductor cross section, flexible
  10
Connection
Feed-in stage
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ECLASS 5.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Potentials
1
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 15
30.4 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of levels
1
Overvoltage category
III
Maximum total current
57 A (with 10 mm² conductor cross section)
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
58.1 mm
Width
28.6 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Value
1 mm²
ECLASS 4.0
27141121
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Insulating material group
I
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Short-time current
1.2 kA
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 18.0
39121410

Product condition