3273264 Phoenix Contact Terminal Blocks
Part#:3273264
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 527
May 9, 2024
About the product: Distribution block, Basic terminal block, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 24 A, connection method: Push-in connection, number of
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273264 Phoenix Contact price in the box on the right side or send a quick quote.
3273264 Product Details
- Nominal cross section 2.5 mm²
- Overvoltage category III
- Nominal current IN 24 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Oscillation, broadband noise test result Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Shock test result Test passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Width 16 mm
- Stripping length 8 mm ... 10 mm
- Conductor cross section AWG min. 26
- Conductor cross section flexible max. 2.5 mm²
- Potentials 1
- Rated surge voltage 6 kV
- Number of connections 6
- Degree of pollution 3
- Maximum power dissipation for nominal condition 0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Nominal voltage UN 450 V
- Back of the hand protection guaranteed
- Finger protection guaranteed
- ASD level 6.12 (m/s2)2/Hz
- Test duration per axis 5 h
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Surface flammability NFPA 130 (ASTM E 162) passed
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Height 21.7 mm
- Connection in acc. with standard IEC 60998-2-2
- Min. AWG conductor cross section, flexible 26
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
- Internal cylindrical gage A3
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 10.0.1 27141120
- ECLASS 6.0 27141100
- ETIM 3.0 EC000897
- ECLASS 9.0 27141120
- UNSPSC 12.01 39121410
- UNSPSC 19.0 39121410
- Number of levels 1
- Insulating material PA
- Insulating material group I
- Maximum total current 48 A
- Open side panel No
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Shock form Half-sine
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Length 28.6 mm
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible min. 0.14 mm²
- Max. AWG conductor cross section, flexible 12
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 4.0 27141121
- ECLASS 5.0 27141120
- ECLASS 5.1 27141120
- UNSPSC 7.0901 39121410
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- Note When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks.
- Color gray
- Flammability rating according to UL 94 V0
- Maximum load current 32 A
- Result of thermal test Test passed
- Result of tight fit on support Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Acceleration 30g
- Shock duration 18 ms
- Number of shocks per direction 3
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Connection method Push-in connection
- Conductor cross section solid min. 0.34 mm²
- Conductor cross section AWG max. 12
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Connection cross sections directly pluggable 0.34 mm² 4 mm² 24 12
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 4.1 27141121
- ETIM 6.0 EC000897
- ETIM 7.0 EC000897
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- ECLASS 11.0 27141120
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 7.0 27141120
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 6.01 30211811
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$2.37
3273264
Stock:
527
Select Qty:
$2.37
$2.37 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨