3273944 Phoenix Contact Terminal Blocks

3273944 Product Details

• Number of levels
  1
• Potentials
  1
• Degree of pollution
  3
• Maximum total current
  41 A
• Finger protection
  guaranteed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test duration per axis
  5 h
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Stripping length
  10 mm ... 12 mm
• Nominal cross section
  4 mm²
• Rated surge voltage
  6 kV
• Nominal current IN
  32 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Color
gray
Insulating material group
I
Maximum load current
63 A
Back of the hand protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
36.9 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 6.01
30211811
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Insulating material
PA
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
450 V
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
28.6 mm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of connections
12
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
No
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
22.7 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141120
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Max. AWG conductor cross section, flexible
12
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 3.0
EC000897
Shock form
Half-sine
UNSPSC 19.0
39121410
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)

Product condition