8BVI0110HCD0.000-3 B&R Electronic Components
Part#:8BVI0110HCD0.000-3
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti3 inverter module, 15.1 A, AS, cold plate or pass-through mounting, 2 axes, optimized for applications with decentralized, computationally intensive open-loop and closed-loop control requirements
Check out the 8BVI0110HCD0.000-3 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight4.1 kg
- Temperature Operation Maximum 55°C
- Terminal connection cross section Approbation data CSA 28 to 10 AWG
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 5 kHz Cold plate mounting 0.38 A/K (starting at 51°C)
- Dimensions Depth Pass-through mounting 209 mm
- Dimensions Depth Cold plate 212 mm
- Temperature Operation Nominal 5 to 40°C
- Terminal connection cross section Approbation data UL/C-UL-US 30 to 10 AWG
- Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves 0.25 to 6 mm²
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 20 kHz Pass-through mounting 0.14 A/K (starting at -74°C)
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 20 kHz Cold plate mounting 0.19 A/K (starting at -14°C)
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 10 kHz Pass-through mounting 0.16 A/K (starting at 2°C)
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 5 kHz Pass-through mounting 0.27 A/K (starting at 46°C)
- Dimensions Height 317 mm
- Dimensions Width 106.5 mm
- Reduction of continuous current depending on switching frequency and mounting type Switching frequency 10 kHz Cold plate mounting 0.25 A/K (starting at 24°C)
- Relative humidity Storage 5 to 95%
- Relative humidity Transport Max. 95% at 40°C
- Temperature Transport -25 to 70°C
- Temperature Storage -25 to 55°C
- Relative humidity Operation 5 to 85%
- Installation elevation above sea level Maximum 4000 m
- Installation elevation above sea level Nominal 0 to 500 m
- Permissible mounting orientations Standing horizontally No
- Permissible mounting orientations Horizontal, face up Yes
- Permissible mounting orientations Hanging vertically Yes
- Switching delay at nominal input voltage Enable 0 → 1, ready for PWM Max. 100 µs
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Switching delay at nominal input voltage Enable 1 → 0, PWM off Max. 20.5 ms
- Input voltage Nominal 24 VDC
- Switching threshold High >15 V
- Switching threshold Low <5 V
- Electrical isolation Input - Input Yes
- Electrical isolation Input - Inverter module Yes
- Input voltage Maximum 30 VDC
- Protective measures Overload and short-circuit protection Yes
- Protective measures Undervoltage monitoring Yes
- Protective measures Open-circuit monitoring Yes
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 10 m
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Variant Shield connection Yes
- Protective measures Short-circuit and ground fault protection Yes
- Power dissipation depending on switching frequency Switching frequency 20 kHz [1.66 * IM² + 21 * IM + 380] W
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Protective measures Overload protection Yes
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 1.51 Aeff per 1000 m
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Variant U, V, W, PE Connector
- Power dissipation depending on switching frequency Switching frequency 10 kHz [0.97 * IM² + 9.5 * IM + 170] W
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Voltage Nominal 750 VDC
- Power dissipation depending on switching frequency Switching frequency 5 kHz [0.33 * IM² + 11 * IM + 90] W
- Certifications UL cULus E225616; Power conversion equipment
- Certifications EAC Yes
- Certifications Functional safety Yes
- Certifications CE Yes
- Module width 2
- Overvoltage category per EN 61800-5-1 III
- Discharge capacitance 0.44 µF
- Degree of protection per EN 60529 IP20
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Modulation compared to ground potential Max. ±38 V
- Response threshold for undervoltage monitoring 24 VDC +0% / -4%
- Max. switching frequency 0.5 Hz
- OSSD signal connections Permitted ; Max. test pulse length: 500 µs
- Input current at nominal voltage Approx. 30 mA
- Response threshold for open-circuit monitoring Approx. 0.5 A
- Circuit Sink
- Max. extinction energy per switching operation 3 Ws
- Max. internal resistance 0.3 Ω
- Extinction potential Approx. 30 V
- Output voltage 24 VDC +5.8% / -0%
- Continuous current 2.1 A
- Terminal cable cross section dimension of shield connection 12 to 22 mm
- Max. output frequency 598 Hz
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Peak current per motor connection 37.7 Aeff
- Nominal switching frequency 5 kHz
- Possible switching frequencies 5 / 10 / 20 kHz
- Continuous current per motor connection 15.1 Aeff
- Continuous power per motor connection 11 kW
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Quantity 2
- Max. power consumption 20 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s)
- Slots for plug-in modules 2
- B&R ID code 0xA8E3
- Note Optimized for applications with decentralized, computationally intensive open-loop and closed-loop control requirements
- Input voltage 25 VDC ±1.6%
- Continuous power consumption 22.3 kW
- Variant ACOPOSmulti backplane
- DC bus capacitance 660 µF
- Input capacitance 23.5 µF
- Cooling and mounting type Cold plate or pass-through mounting
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0110HCD0.000-3 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
