8BVI1650HWS0.004-1 B&R Electronic Components
Part#:8BVI1650HWS0.004-1
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti inverter module, 165 A, AS, wall mounting
Check out the 8BVI1650HWS0.004-1 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight23 kg
- Dimensions Width 427.5 mm
- Temperature Operation Maximum 55°C
- Dimensions Height 317 mm
- Installation elevation above sea level Nominal 0 to 500 m
- Permissible mounting orientations Horizontal, face up Yes
- Temperature Storage -25 to 55°C
- Permissible mounting orientations Standing horizontally No
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Protective measures Undervoltage monitoring Yes
- Protective measures Overload and short-circuit protection Yes
- Protective measures Short-circuit and ground fault protection Yes
- Protective measures Overload protection Yes
- Degree of protection per EN 60529 IP20
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 16.5 Aeff per 1000 m
- OSSD signal connections Permitted ; Max. test pulse length: 500 µs
- Dimensions Depth Wall mounting 263 mm
- Temperature Operation Nominal 5 to 40°C
- Temperature Transport -25 to 70°C
- Relative humidity Transport Max. 95% at 40°C
- Installation elevation above sea level Maximum 4000 m
- Relative humidity Storage 5 to 95%
- Relative humidity Operation 5 to 85%
- Switching delay at nominal input voltage Enable 1 → 0, PWM off Max. 20.5 ms
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Switching threshold High >15 V
- Permissible mounting orientations Hanging vertically Yes
- Switching delay at nominal input voltage Enable 0 → 1, ready for PWM Max. 100 µs
- Input voltage Nominal 24 VDC
- Input voltage Maximum 30 VDC
- Switching threshold Low <5 V
- Electrical isolation Input - Input Yes
- Connection cross section range Flexible and fine-stranded wires ---
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Electrical isolation Input - Inverter module Yes
- Variant Shield connection Yes
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 25 m
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Protective measures Open-circuit monitoring Yes
- Variant U, V, W, PE M8 threaded bolts
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Reduction of continuous current depending on switching frequency Switching frequency 5 kHz 2.89 A/K (starting at 41°C)
- Reduction of continuous current depending on switching frequency Switching frequency 10 kHz 1 A/K (starting at -46°C)
- Reduction of continuous current depending on switching frequency Switching frequency 20 kHz 0.75 A/K (starting at -151°C)
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Power dissipation depending on switching frequency Switching frequency 20 kHz In preparation
- Voltage Nominal 750 VDC
- Power dissipation depending on switching frequency Switching frequency 10 kHz In preparation
- Power dissipation depending on switching frequency Switching frequency 5 kHz In preparation
- Certifications CE Yes
- Overvoltage category per EN 61800-5-1 III
- Module width 8
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Certifications UL cULus E225616; Power conversion equipment
- Certifications Functional safety Yes
- Input current at nominal voltage Approx. 30 mA
- Discharge capacitance 0.9 µF
- Max. internal resistance 0.15 Ω
- Max. switching frequency 0.5 Hz
- Extinction potential Approx. 30 V
- Continuous current 4.2 A
- Circuit Sink
- Modulation compared to ground potential Max. ±38 V
- Continuous power per motor connection 120 kW
- Max. output frequency 598 Hz
- Response threshold for undervoltage monitoring 24 VDC +0% / -4%
- Response threshold for open-circuit monitoring Approx. 0.5 A
- Max. extinction energy per switching operation 3 Ws
- Nominal switching frequency 5 kHz
- Possible switching frequencies 5 / 10 / 20 kHz
- Continuous current per motor connection 165 Aeff
- Terminal cable cross section dimension of shield connection 12 to 50 mm
- Output voltage 24 VDC +5.8% / -0%
- Peak current 330 Aeff
- B&R ID code 0x2ABC
- Continuous power consumption 121.8 kW
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Input voltage 25 VDC ±1.6%
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Cooling and mounting type Wall mounting
- Variant ACOPOSmulti backplane
- DC bus capacitance 3630 µF
- Quantity 2
- Input capacitance 32.9 µF
- Max. power consumption 37 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake
- Slots for plug-in modules 2
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI1650HWS0.004-1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
