8BVI0055HWDS.000-1 B&R Electronic Components
Part#:8BVI0055HWDS.000-1
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti SafeMOTION EnDat 2.2 inverter module, 7.6 A, AS, wall mounting, 2 axes
Check out the 8BVI0055HWDS.000-1 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight2.9 kg
- Dimensions Depth Wall mounting 263 mm
- Temperature Operation Maximum 55°C
- Encoder power supply Protective measures Short-circuit proof Yes
- Encoder power supply Protective measures Overload-proof Yes
- Terminal connection cross section Approbation data CSA 28 to 10
- Temperature Operation Nominal 5 to 40°C
- Terminal connection cross section Approbation data UL/C-UL-US 30 to 10
- Dimensions Height 317 mm
- Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves 0.25 to 4 mm²
- Temperature Transport -25 to 70°C
- Relative humidity Storage 5 to 95%
- Dimensions Width 53 mm
- Installation elevation above sea level Nominal 0 to 500 m
- Temperature Storage -25 to 55°C
- Relative humidity Transport Max. 95% at 40°C
- Relative humidity Operation 5 to 85%
- Installation elevation above sea level Maximum 4000 m
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Permissible mounting orientations Horizontal, face up Yes
- Permissible mounting orientations Standing horizontally No
- Permissible mounting orientations Hanging vertically Yes
- Electrical isolation Input - Input Yes
- Input voltage Maximum 30 VDC
- Input voltage Nominal 24 VDC
- Switching threshold High >15 V
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Switching threshold Low <5 V
- Electrical isolation Input - Inverter module Yes
- Synchronous serial interface Data transfer rate 6.25 Mbit/s
- Synchronous serial interface Signal transmission RS485
- Encoder power supply Output voltage Typ. 12.5 V
- Electrical isolation Encoder - ACOPOSmulti No
- Encoder power supply Load capacity 350 mA
- Protective measures Undervoltage monitoring Yes
- Protective measures Overload and short-circuit protection Yes
- Protective measures Open-circuit monitoring Yes
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 10 m
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Variant Shield connection Yes
- Protective measures Overload protection Yes
- Protective measures Short-circuit and ground fault protection Yes
- Variant U, V, W, PE Connector
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 0.76 Aeff per 1000 m
- Reduction of continuous current depending on switching frequency Switching frequency 20 kHz 0.15 A/K (starting at -14°C)
- Reduction of continuous current depending on switching frequency Switching frequency 10 kHz 0.22 A/K (starting at 43°C)
- Reduction of continuous current depending on switching frequency Switching frequency 5 kHz No reduction
- Voltage Nominal 750 VDC
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Power dissipation depending on switching frequency Switching frequency 20 kHz [6 * IM² - 9.4 * IM + 430] W
- Power dissipation depending on switching frequency Switching frequency 10 kHz [2.56 * IM² + 2.8 * IM + 200] W
- Certifications KC Yes
- Power dissipation depending on switching frequency Switching frequency 5 kHz [1.2 * IM² + 2.62 * IM + 100] W
- Certifications UL cULus E225616; Power conversion equipment
- Degree of protection per EN 60529 IP20
- Certifications EAC Yes
- Certifications Functional safety Yes (openSAFETY)
- Max. power consumption 28 W + PSMC1 + PSMC2 + P24 V Out + PHoldingBrake(s)
- Continuous power consumption 11.19 kW
- Certifications CE Yes
- Module width 1
- Cooling and mounting type Wall mounting
- Overvoltage category per EN 61800-5-1 III
- Discharge capacitance 0.2 µF
- Circuit Sink
- DC bus capacitance 330 µF
- Max. power consumption per encoder interface PSMC[W] = 19 V * IEncoder[A]
- Input current at nominal voltage Approx. 10 mA
- Max. encoder cable length 100 m ; Depends on the cross section of the power supply wires in the encoder cable
- Input capacitance 23.5 µF
- Input voltage 25 VDC ±1.6%
- Connections 9-pin female DSUB connector
- Type EnDat 2.2
- Extinction potential Approx. 30 V
- Max. internal resistance 0.5 Ω
- Max. output frequency 598 Hz
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Modulation compared to ground potential Max. ±38 V
- Status indicators UP/DN LEDs
- Encoder monitoring Yes
- Response threshold for open-circuit monitoring Approx. 0.25 A
- Response threshold for undervoltage monitoring 24 VDC -2% / -4%
- Max. switching frequency 0.5 Hz
- Max. extinction energy per switching operation 1.5 Ws
- Continuous current 1.1 A
- Output voltage 24 VDC +5.8% / -0%
- Possible switching frequencies 5 / 10 / 20 kHz
- Peak current per motor connection 18.9 Aeff
- Nominal switching frequency 5 kHz
- Continuous current per motor connection 7.6 Aeff
- Terminal cable cross section dimension of shield connection 12 to 22 mm
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Continuous power per motor connection 5.5 kW
- Quantity 2
- B&R ID code 0xAA15
- Slots for plug-in modules 2
- Variant ACOPOSmulti backplane
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0055HWDS.000-1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
