8BVI0028HWD0.000-1 B&R Electronic Components
Part#:8BVI0028HWD0.000-1
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti inverter module, 3.8 A, AS, wall mounting, 2 axes
Check out the 8BVI0028HWD0.000-1 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight2.8 kg
- Power dissipation depending on switching frequency Switching frequency 10 kHz [2.56 * IM² + 2.8 * IM + 200] W
- Reduction of continuous current depending on switching frequency Switching frequency 20 kHz 0.12 A/K (starting at 13°C)
- Voltage Nominal 750 VDC
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Reduction of continuous current depending on switching frequency Switching frequency 5 kHz No reduction
- Module width 1
- Certifications Functional safety Yes
- Certifications EAC Yes
- Degree of protection per EN 60529 IP20
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Modulation compared to ground potential Max. ±38 V
- Response threshold for undervoltage monitoring 24 VDC +0% / -4%
- Discharge capacitance 0.2 µF
- OSSD signal connections Permitted ; Max. test pulse length: 500 µs
- Max. extinction energy per switching operation 1.5 Ws
- Response threshold for open-circuit monitoring Approx. 0.25 A
- Max. internal resistance 0.5 Ω
- Terminal cable cross section dimension of shield connection 12 to 22 mm
- Output voltage 24 VDC +5.8% / -0%
- DC bus capacitance 165 µF
- Switching delay at nominal input voltage Enable 0 → 1, ready for PWM Max. 100 µs
- Protective measures Open-circuit monitoring Yes
- Variant Shield connection Yes
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Protective measures Overload protection Yes
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Certifications UL cULus E225616; Power conversion equipment
- Power dissipation depending on switching frequency Switching frequency 5 kHz [1.2 * IM² + 2.62 * IM + 100] W
- Temperature Operation Maximum 55°C
- Terminal connection cross section Approbation data UL/C-UL-US 30 to 10 AWG
- Terminal connection cross section Approbation data CSA 28 to 10 AWG
- Temperature Operation Nominal 5 to 40°C
- Dimensions Height 317 mm
- Dimensions Depth Wall mounting 263 mm
- Temperature Transport -25 to 70°C
- Dimensions Width 53 mm
- Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves 0.25 to 6 mm²
- Relative humidity Storage 5 to 95%
- Permissible mounting orientations Hanging vertically Yes
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Relative humidity Transport Max. 95% at 40°C
- Installation elevation above sea level Nominal 0 to 500 m
- Temperature Storage -25 to 55°C
- Relative humidity Operation 5 to 85%
- Permissible mounting orientations Horizontal, face up Yes
- Permissible mounting orientations Standing horizontally No
- Installation elevation above sea level Maximum 4000 m
- Switching delay at nominal input voltage Enable 1 → 0, PWM off Max. 20.5 ms
- Switching threshold High >15 V
- Input voltage Maximum 30 VDC
- Electrical isolation Input - Input Yes
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Switching threshold Low <5 V
- Protective measures Undervoltage monitoring Yes
- Input voltage Nominal 24 VDC
- Protective measures Overload and short-circuit protection Yes
- Electrical isolation Input - Inverter module Yes
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 10 m
- Variant U, V, W, PE Connector
- Protective measures Short-circuit and ground fault protection Yes
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 0.38 Aeff per 1000 m
- Power dissipation depending on switching frequency Switching frequency 20 kHz [6 * IM² - 9.4 * IM + 430] W
- Reduction of continuous current depending on switching frequency Switching frequency 10 kHz No reduction
- Certifications KC Yes
- Certifications CE Yes
- Input current at nominal voltage Approx. 30 mA
- Overvoltage category per EN 61800-5-1 III
- Circuit Sink
- Continuous current 1.1 A
- Max. output frequency 598 Hz
- Max. switching frequency 0.5 Hz
- Extinction potential Approx. 30 V
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Continuous power per motor connection 2.8 kW
- Continuous current per motor connection 3.8 Aeff
- Possible switching frequencies 5 / 10 / 20 kHz
- Nominal switching frequency 5 kHz
- Quantity 2
- Peak current per motor connection 9.5 Aeff
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Slots for plug-in modules 2
- Continuous power consumption 5.73 kW
- Variant ACOPOSmulti backplane
- B&R ID code 0x26E1
- Max. power consumption 16 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s)
- Input voltage 25 VDC ±1.6%
- Input capacitance 23.5 µF
- Cooling and mounting type Wall mounting
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0028HWD0.000-1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
