3273961 Phoenix Contact Terminal Blocks
Part#:3273961
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Distribution block, bridged internally, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 32 A, connection method: Push-in connection, number of co
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273961 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of connections 12
- Rated surge voltage 6 kV
- Maximum total current 41 A
- Back of the hand protection guaranteed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Acceleration 30g
- Shock form Half-sine
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Height 22.7 mm
- Potentials 1
- Overvoltage category III
- Insulating material group I
- Nominal current IN 32 A
- Oscillation, broadband noise test result Test passed
- Result of thermal test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Connection method Push-in connection
- Stripping length 10 mm ... 12 mm
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.75 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 5.1 27141120
- ECLASS 7.0 27141120
- UNSPSC 13.2 39121410
- Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
- Insulating material PA
- Degree of pollution 3
- Open side panel No
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Connection in acc. with standard IEC 60998-2-2
- Conductor cross section solid max. 6 mm²
- Conductor cross section flexible min. 0.2 mm²
- Max. AWG conductor cross section, flexible 12
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- Ambient temperature (actuation) -5 °C ... 70 °C
- Nominal cross section 4 mm²
- Maximum load current 63 A
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test spectrum Service life test category 2, bogie-mounted
- Shock test result Test passed
- Shock duration 18 ms
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Width 36.9 mm
- Conductor cross section AWG max. 10
- Min. AWG conductor cross section, flexible 24
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Operating temperature -35 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 4.0 27141120
- ECLASS 5.0 27141120
- ETIM 7.0 EC000897
- ETIM 3.0 EC000897
- Number of levels 1
- Color pink
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Nominal voltage UN 450 V
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Finger protection guaranteed
- Test duration per axis 5 h
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Length 28.6 mm
- Conductor cross section solid min. 0.5 mm²
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Internal cylindrical gage A4
- ECLASS 11.0 27141120
- Conductor cross section AWG min. 24
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- Connection cross sections directly pluggable 0.5 mm² 6 mm² 20 10
- ETIM 2.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 19.0 39121410
- ECLASS 6.0 27141100
- ECLASS 9.0 27141120
- UNSPSC 6.01 30211811
- UNSPSC 20.0 39121410
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 10.0.1 27141120
- ECLASS 4.1 27141120
- ETIM 6.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 18.0 39121410
- ETIM 4.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 21.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨