3273110 Phoenix Contact Terminal Blocks

3273110 Product Details

• Potentials
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Number of connections
  19
• Rated surge voltage
  8 kV
• Overvoltage category
  III
• Nominal voltage UN
  690 V
• Tensile test result
  Test passed
• Result of flexion and pull-out test
  Test passed
• Short-time current
  1.2 kA
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Length
  58.1 mm
• Conductor cross section solid max.
  10 mm²
• Conductor cross section AWG max.
  8
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  6 mm²
Value
1 mm²
ECLASS 11.0
27141120
ECLASS 5.1
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Nominal cross section feed-in
6 mm²
Degree of pollution
3
Maximum load current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of aging test
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
10 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Number of levels
1
Color
gray
Flammability rating according to UL 94
V0
Maximum total current
57 A (with 10 mm² conductor cross section)
Open side panel
No
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35
Setpoint
5 N
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
1 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
1 mm² 10 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
Nominal cross section
2.5 mm²
Insulating material group
I
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
28.6 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection
Feed-in stage
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Height NS 15
30.4 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Result of thermal test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
ASD level
6.12 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock form
Half-sine
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section short circuit testing
10 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed

Product condition