3273136 Phoenix Contact Terminal Blocks
Part#:3273136
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1730
Nov 2, 2024
Distribution block, Block with horizontal alignment, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 690 V, nominal current: 24 A, connection method: Push-in connection,
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273136 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- UNSPSC 12.01 39121410
- Connection cross sections directly pluggable 0.34 mm² 4 mm² 24 12
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121410
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 6.0 27141100
- ECLASS 5.1 27141120
- ETIM 7.0 EC000897
- ETIM 6.0 EC000897
- UNSPSC 18.0 39121410
- UNSPSC 20.0 39121410
- UNSPSC 19.0 39121410
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Color red
- Maximum power dissipation for nominal condition 0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Number of levels 1
- Overvoltage category III
- Insulating material group I
- Nominal voltage UN 690 V
- Potentials 1
- Insulating material PA
- Maximum total current 48 A
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Bending test rotation speed 10 rpm
- Result of voltage-drop test Test passed
- Short circuit stability result Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test spectrum Service life test category 2, bogie-mounted
- Number of shocks per direction 3
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 35/7,5 30.9 mm
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible max. 2.5 mm²
- Internal cylindrical gage A3
- ECLASS 5.0 27141120
- ETIM 3.0 EC000897
- Number of connections 6
- Rated surge voltage 8 kV
- Maximum load current 32 A
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 1.89 kV
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of tight fit on support Test passed
- Short-time current 0.48 kA
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Shock form Half-sine
- Shock duration 18 ms
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section solid min. 0.34 mm²
- Conductor cross section flexible min. 0.14 mm²
- Min. AWG conductor cross section, flexible 26
- ECLASS 9.0 27141120
- Nominal cross section 2.5 mm²
- Flammability rating according to UL 94 V0
- Degree of pollution 3
- Open side panel No
- Result of surge voltage test Test passed
- Bending test turns 135
- Result of temperature-rise test Test passed
- Conductor cross section short circuit testing 4 mm²
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Test duration per axis 5 h
- Surface flammability NFPA 130 (ASTM E 162) passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Connection method Push-in connection
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
- ECLASS 11.0 27141120
- ECLASS 7.0 27141120
- Nominal current IN 24 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
- Tight fit on carrier NS 35
- Result of thermal test Test passed
- Ageing test for screwless modular terminal block temperature cycles 192
- Acceleration 30g
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Width 16 mm
- Stripping length 8 mm ... 10 mm
- Conductor cross section AWG min. 26
- Max. AWG conductor cross section, flexible 14
- ECLASS 4.0 27141121
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 21.0 39121410
- Result of flexion and pull-out test Test passed
- Tensile test result Test passed
- Setpoint 1 N
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of aging test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock test result Test passed
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Length 45.7 mm
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141120
- ECLASS 4.1 27141121
- UNSPSC 7.0901 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$2.70
Stock:
1730
Select Qty:
$2.70
$2.70 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨