3273344 Phoenix Contact Terminal Blocks
Part#:3273344
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1859
Nov 26, 2024
Distribution block, Basic terminal block with supply, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 24 A, connection method: Push-in connection
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273344 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Back of the hand protection guaranteed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock form Half-sine
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Width 25.6 mm
- Stripping length 10 mm ... 12 mm
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 5.0 27141120
- ECLASS 9.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 20.0 39121410
- Open side panel No
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test spectrum Service life test category 2, bogie-mounted
- Shock test result Test passed
- Surface flammability NFPA 130 (ASTM E 162) passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Connection method Push-in connection
- Conductor cross section AWG min. 20
- Max. AWG conductor cross section, flexible 10
- Connection cross sections directly pluggable 1 mm² 10 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 6.0 27141100
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- Result of thermal test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section solid min. 1 mm²
- Min. AWG conductor cross section, flexible 20
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- ECLASS 10.0.1 27141120
- ECLASS 5.1 27141120
- ECLASS 7.0 27141120
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- Finger protection guaranteed
- Oscillation, broadband noise test result Test passed
- Test duration per axis 5 h
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height 21.7 mm
- Conductor cross section solid max. 10 mm²
- Conductor cross section AWG max. 8
- Conductor cross section flexible max. 10 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- Connection Feed-in stage
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 11.0 27141120
- ECLASS 4.1 27141121
- ETIM 6.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- Nominal voltage UN 450 V
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 30g
- Shock duration 18 ms
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Length 28.6 mm
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Connection in acc. with standard IEC 60998-2-2
- Conductor cross section flexible min. 0.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- Internal cylindrical gage A3
- Value 1 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 4.0 27141121
- ETIM 3.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 7.0901 39121410
- Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
- Nominal cross section 2.5 mm²
- Insulating material group I
- Number of levels 1
- Insulating material PA
- Rated surge voltage 6 kV
- Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Potentials 1
- Color black
- Maximum total current 57 A (with 10 mm² conductor cross section)
- Nominal cross section feed-in 6 mm²
- Degree of pollution 3
- Nominal current IN 41 A (with 6 mm² conductor cross section)
- Number of connections 7
- Flammability rating according to UL 94 V0
- Maximum load current 57 A (with 10 mm² conductor cross section)
- Overvoltage category III
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$3.33
Stock:
1,859
Select Qty:
$3.33
$3.33 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
