3273210 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Nominal cross section feed-in
  6 mm²
• Rated surge voltage
  8 kV
• Open side panel
  No
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Setpoint
  5 N
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Overvoltage category
  III
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Number of connections
  7
• Degree of pollution
  3
• Color
  white
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Back of the hand protection
  guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
41 A (with 6 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Tensile test result
Test passed
Conductor cross section short circuit testing
10 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
30.9 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ECLASS 4.0
27141121
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
690 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
45.7 mm
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Connection
Feed-in stage
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
ETIM 7.0
EC000897
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
25.6 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.5 mm²
Value
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Result of aging test
Test passed
Shock test result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Shock duration
18 ms
Short-time current
1.2 kA
Test duration per axis
5 h
Connection cross sections directly pluggable
1 mm² 10 mm²
Test spectrum
Service life test category 2, bogie-mounted
Conductor cross section flexible max.
10 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
ECLASS 11.0
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C