3273950 Phoenix Contact Terminal Blocks

Product Details

• Shock form
  Half-sine
• UNSPSC 19.0
  39121410
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Color
  yellow
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Length
  28.6 mm
• Conductor cross section AWG min.
  24
• Conductor cross section flexible max.
  4 mm²
• Connection cross sections directly pluggable
  0.5 mm² 6 mm² 20 10
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 5.0
  27141120
• ETIM 3.0
  EC000897
• UNSPSC 6.01
  30211811
• Number of connections
  12
• Flammability rating according to UL 94
  V0
Overvoltage category
III
Open side panel
No
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Nominal cross section
4 mm²
Maximum total current
41 A
Maximum load current
63 A
Back of the hand protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Potentials
1
Insulating material
PA
Insulating material group
I
Nominal current IN
32 A
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock duration
18 ms
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
22.7 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of levels
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
450 V
Finger protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
36.9 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Internal cylindrical gage
A4
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ECLASS 7.0
27141120
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141120
ECLASS 5.1
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
ECLASS 4.1
27141120
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ETIM 6.0
EC000897
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
UNSPSC 21.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
UNSPSC 11
39121410