3273940 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  orange
• Insulating material
  PA
• Maximum load current
  63 A
• Maximum total current
  41 A
• Nominal current IN
  32 A
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• UNSPSC 19.0
  39121410
• Insulating material group
  I
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Degree of pollution
  3
• Open side panel
  No
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Nominal voltage UN
  450 V
• Test spectrum
  Service life test category 2, bogie-mounted
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock duration
  18 ms
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Length
  28.6 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG max.
10
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Result of thermal test
Test passed
Acceleration
30g
Shock form
Half-sine
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Back of the hand protection
guaranteed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
18.5 mm
Connection method
Push-in connection
Conductor cross section flexible max.
4 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
Number of connections
6
Rated surge voltage
6 kV
Finger protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
22.7 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 12.01
39121410
Potentials
1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
ECLASS 4.0
27141120
ECLASS 5.1
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410