3273938 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  6
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Back of the hand protection
  guaranteed
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Stripping length
  10 mm ... 12 mm
• Height
  22.7 mm
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Color
  violet
• Maximum power dissipation for nominal condition
  1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Nominal current IN
  32 A
• Finger protection
  guaranteed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of levels
1
Rated surge voltage
6 kV
Overvoltage category
III
Maximum total current
41 A
Open side panel
No
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
ETIM 6.0
EC000897
Potentials
1
Insulating material group
I
Degree of pollution
3
Result of thermal test
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
28.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ECLASS 5.1
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Nominal cross section
4 mm²
Nominal voltage UN
450 V
Maximum load current
63 A
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Surface flammability NFPA 130 (ASTM E 162)
passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
18.5 mm
Conductor cross section AWG max.
10
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.2 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141120
ETIM 4.0
EC000897
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 4.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410