3273876 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  black/yellow
• Maximum load current
  57 A
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Acceleration
  30g
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Stripping length
  12 mm ... 14 mm
• Conductor cross section flexible max.
  10 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  10 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  4 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Nominal cross section feed-in
  10 mm²
• Rated surge voltage
  6 kV
• Nominal voltage UN
  450 V
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
21.7 mm
Number of connections
7
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
No
Back of the hand protection
guaranteed
Finger protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
28.6 mm
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
8
Connection cross sections directly pluggable
0.5 mm² 16 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Nominal cross section
4 mm²
Overvoltage category
III
Nominal current IN
57 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
27.9 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Potentials
1
Insulating material
PA
Insulating material group
I
Maximum total current
63 A
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
16 mm²
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Connection
Feed-in stage
Conductor cross section solid min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A4
Value
1 mm²
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897