3273114 Phoenix Contact Terminal Blocks

3273114 Product Details

• Potentials
  1
• Nominal cross section feed-in
  6 mm²
• Degree of pollution
  3
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Conductor cross section short circuit testing
  10 mm²
• Oscillation, broadband noise test result
  Test passed
• Shock test result
  Test passed
• Shock form
  Half-sine
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Color
  red
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
Number of levels
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
690 V
Finger protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Tight fit on carrier
NS 35
Short-time current
1.2 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
28.6 mm
Number of connections
19
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Maximum total current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
20
Value
1 mm²
Flammability rating according to UL 94
V0
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Connection method
Push-in connection
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Result of power-frequency withstand voltage test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
1 mm² 10 mm²
Insulating material group
I
Setpoint
5 N
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Height NS 15
30.4 mm
Conductor cross section solid min.
1 mm²
Length
58.1 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
Result of flexion and pull-out test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Overvoltage category
III
Short circuit stability result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Min. AWG conductor cross section, flexible
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410

Product condition