3273870 Phoenix Contact Terminal Blocks

3273870 Product Details

• Overvoltage category
  III
• Maximum total current
  63 A
• Value
  1 mm²
• ETIM 6.0
  EC000897
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Shock form
  Half-sine
• Shock duration
  18 ms
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  27.9 mm
• Connection in acc. with standard
  IEC 60998-2-2
• Conductor cross section solid min.
  0.5 mm²
• Conductor cross section solid max.
  16 mm²
• Flammability rating according to UL 94
  V0
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height
  21.7 mm
Conductor cross section AWG max.
6
Conductor cross section flexible min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
Rated surge voltage
6 kV
Maximum load current
57 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
12 mm ... 14 mm
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Connection cross sections directly pluggable
0.5 mm² 16 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 7.0
EC000897
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
28.6 mm
Connection method
Push-in connection
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
ECLASS 10.0.1
27141120
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Potentials
1
Degree of pollution
3
Nominal voltage UN
450 V
Finger protection
guaranteed
Number of connections
7
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Nominal cross section
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of levels
1
Color
black
Insulating material group
I
Back of the hand protection
guaranteed
Proof of thermal characteristics (needle flame) effective duration
30 s
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
ECLASS 6.0
27141100
Nominal cross section feed-in
10 mm²
Insulating material
PA
Nominal current IN
57 A
Open side panel
No
Connection
Feed-in stage
Result of thermal test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²

Product condition