3273856 Phoenix Contact Terminal Blocks
Part#:3273856
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Distribution block, nom. voltage: 450 V, nominal current: 32 A, connection method: Push-in connection, Push-in connection, number of connections: 7, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 27.9 mm, height: 21.7 mm, color: gray, mounting type:
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273856 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Internal cylindrical gage A5
- ECLASS 5.0 27141120
- ECLASS 6.0 27141100
- Number of levels 1
- Insulating material PA
- ETIM 3.0 EC000897
- Nominal cross section 4 mm²
- Nominal cross section feed-in 10 mm²
- Degree of pollution 3
- Note When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks.
- Test spectrum Service life test category 2, bogie-mounted
- Number of connections 7
- Potentials 1
- Rated surge voltage 6 kV
- Flammability rating according to UL 94 V0
- Maximum load current 57 A
- Overvoltage category III
- Nominal voltage UN 450 V
- Nominal current IN 57 A
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Acceleration 30g
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock test result Test passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Length 28.6 mm
- Connection method Push-in connection
- Connection in acc. with standard IEC 60998-2-2
- Color gray
- Insulating material group I
- Maximum total current 63 A
- Open side panel No
- Tight fit on carrier NS 35/NS 15
- Result of tight fit on support Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock form Half-sine
- Number of shocks per direction 3
- Shock duration 18 ms
- Static insulating material application in cold -60 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Width 27.9 mm
- Stripping length 12 mm ... 14 mm
- Conductor cross section solid max. 16 mm²
- Conductor cross section flexible min. 0.5 mm²
- Conductor cross section solid min. 0.5 mm²
- Max. AWG conductor cross section, flexible 8
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 10 mm²
- Connection cross sections directly pluggable 0.5 mm² 16 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 11.0 27141120
- ECLASS 5.1 27141120
- ETIM 6.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- UNSPSC 21.0 39121410
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Height 21.7 mm
- Conductor cross section AWG max. 6
- Min. AWG conductor cross section, flexible 20
- Connection Feed-in stage
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 10.0.1 27141120
- ECLASS 4.0 27141121
- ECLASS 4.1 27141121
- ECLASS 7.0 27141120
- ETIM 4.0 EC000897
- ETIM 7.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 9.0 27141120
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- Value 1 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 4 mm²
- Conductor cross section AWG min. 20
- Conductor cross section flexible max. 10 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm²
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
