3273854 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  18
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Finger protection
  guaranteed
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Stripping length
  10 mm ... 12 mm
• Conductor cross section AWG max.
  10
• Number of levels
  1
• Insulating material
  PA
• Nominal voltage UN
  450 V
• Back of the hand protection
  guaranteed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Surface flammability NFPA 130 (ASTM E 162)
  passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
55.4 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 4.1
27141120
ECLASS 9.0
27141120
Nominal cross section
4 mm²
Degree of pollution
3
Nominal current IN
32 A
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
21.7 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
black/yellow
Maximum load current
41 A
Maximum total current
63 A
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Potentials
1
Rated surge voltage
6 kV
Insulating material group
I
Open side panel
No
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
28.6 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.5 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Internal cylindrical gage
A4
ECLASS 4.0
27141120
ETIM 2.0
EC000897
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
UNSPSC 19.0
39121410
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410