3273850 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  18
• Degree of pollution
  3
• Nominal current IN
  32 A
• Oscillation, broadband noise test result
  Test passed
• Potentials
  1
• Rated surge voltage
  6 kV
• Flammability rating according to UL 94
  V0
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Width
  55.4 mm
• Conductor cross section flexible min.
  0.2 mm²
• Min. AWG conductor cross section, flexible
  24
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 4.0
  27141120
ECLASS 7.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
violet
Insulating material group
I
Maximum load current
41 A
Finger protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
28.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
450 V
Open side panel
No
Stripping length
10 mm ... 12 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Number of levels
1
Nominal cross section
4 mm²
Maximum total current
63 A
Back of the hand protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock test result
Test passed
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid min.
0.5 mm²
Connection method
Push-in connection
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 2.0
EC000897
UNSPSC 19.0
39121410
Acceleration
30g
Test duration per axis
5 h
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
21.7 mm
Conductor cross section AWG min.
24
Conductor cross section AWG max.
10
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Shock form
Half-sine
Result of thermal test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed