3273786 Phoenix Contact Terminal Blocks

3273786 Product Details

• Color
  orange
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Nominal voltage UN
  800 V
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• ECLASS 6.0
  27141100
• ECLASS 9.0
  27141120
• UNSPSC 7.0901
  39121410
• UNSPSC 13.2
  39121410
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• ECLASS 4.0
  27141121
• ECLASS 7.0
  27141120
• UNSPSC 6.01
  30211811
UNSPSC 11
39121410
Potentials
1
Degree of pollution
3
Maximum total current
63 A
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Insulating material
PA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
ECLASS 11.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Nominal cross section feed-in
10 mm²
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Acceleration
30g
Test duration per axis
5 h
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
12 mm ... 14 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Overvoltage category
III
Nominal current IN
32 A
Result of power-frequency withstand voltage test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 16 mm²
Value
1 mm²
Number of connections
19
Flammability rating according to UL 94
V0
Bending test rotation speed
10 rpm
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Connection method
Push-in connection
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
Number of levels
1
Maximum load current
63 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
45.7 mm
Conductor cross section flexible max.
10 mm²
Max. AWG conductor cross section, flexible
8
Connection
Feed-in stage
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Rated surge voltage
6 kV
Power frequency withstand voltage setpoint
2 kV
Result of temperature-rise test
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
64.8 mm
Conductor cross section solid max.
16 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C

Product condition