3273772 Phoenix Contact Terminal Blocks
Part#:3273772
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 62
Nov 26, 2024
Distribution block, nom. voltage: 800 V, nominal current: 32 A, connection method: Push-in connection, Push-in connection, number of connections: 19, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 64.8 mm, color: red, mounting type: NS 35/7,5, NS 35
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273772 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Potentials 1
- Insulating material PA
- Number of levels 1
- Flammability rating according to UL 94 V0
- Overvoltage category III
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 2 kV
- Tensile test result Test passed
- Setpoint 5 N
- Conductor cross section short circuit testing 10 mm²
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Color red
- Degree of pollution 3
- Open side panel No
- Nominal voltage UN 800 V
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of voltage-drop test Test passed
- Short-time current 1.2 kA
- Ageing test for screwless modular terminal block temperature cycles 192
- Acceleration 30g
- Shock form Half-sine
- Number of shocks per direction 3
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Height NS 35/7,5 30.9 mm
- Width 64.8 mm
- Conductor cross section flexible max. 10 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- Value 1 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.1 27141121
- ECLASS 6.0 27141100
- ETIM 6.0 EC000897
- UNSPSC 13.2 39121410
- Number of connections 19
- Rated surge voltage 6 kV
- Maximum total current 63 A
- Finger protection guaranteed
- Bending test rotation speed 10 rpm
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Oscillation, broadband noise test result Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section AWG min. 20
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Connection cross sections directly pluggable 0.5 mm² 16 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.0 27141121
- ETIM 3.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- Nominal cross section 4 mm²
- Nominal cross section feed-in 10 mm²
- Maximum load current 63 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of surge voltage test Test passed
- Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
- Tight fit on carrier NS 35
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Connection method Push-in connection
- Min. AWG conductor cross section, flexible 20
- Max. AWG conductor cross section, flexible 8
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 4 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141120
- ECLASS 5.0 27141120
- ECLASS 9.0 27141120
- UNSPSC 12.01 39121410
- Insulating material group I
- Nominal current IN 32 A
- Result of power-frequency withstand voltage test Test passed
- Result of flexion and pull-out test Test passed
- Bending test turns 135
- Short circuit stability result Test passed
- Result of aging test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Shock test result Test passed
- Shock duration 18 ms
- Surface flammability NFPA 130 (ASTM E 162) passed
- Length 45.7 mm
- Stripping length 12 mm ... 14 mm
- Conductor cross section AWG max. 6
- Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm²
- Internal cylindrical gage A4
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.1 27141120
- ETIM 4.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section solid min. 0.5 mm²
- Conductor cross section solid max. 16 mm²
- Conductor cross section flexible min. 0.5 mm²
- Connection Feed-in stage
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 11.0 27141120
- ECLASS 7.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 21.0 39121410
- UNSPSC 20.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$12.07
Stock:
62
Select Qty:
$12.07
$12.07 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
