3273763 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Insulating material group
  I
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/7,5
  30.9 mm
• Potentials
  1
• Degree of pollution
  3
• Maximum total current
  63 A
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Result of flexion and pull-out test
  Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
16 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Connection cross sections directly pluggable
0.5 mm² 16 mm²
Value
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Number of connections
13
Nominal cross section feed-in
10 mm²
Color
pink
Rated surge voltage
6 kV
Nominal voltage UN
800 V
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Conductor cross section short circuit testing
10 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short-time current
1.2 kA
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
46.3 mm
Conductor cross section AWG max.
6
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Number of levels
1
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Nominal current IN
32 A
Maximum load current
63 A
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Setpoint
5 N
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
45.7 mm
Stripping length
12 mm ... 14 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410