3273762 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Nominal current IN
  32 A
• Number of connections
  13
• Insulating material
  PA
• Insulating material group
  I
• Open side panel
  No
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Conductor cross section short circuit testing
  10 mm²
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Oscillation, broadband noise test result
  Test passed
• Shock form
  Half-sine
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  46.3 mm
• Conductor cross section solid max.
  16 mm²
• Connection in acc. with standard
  IEC 60947-7-1
Conductor cross section solid min.
0.5 mm²
Max. AWG conductor cross section, flexible
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
UNSPSC 12.01
39121410
Nominal cross section feed-in
10 mm²
Degree of pollution
3
Overvoltage category
III
Maximum total current
63 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
12 mm ... 14 mm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Color
violet
Nominal voltage UN
800 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
1.2 kA
Result of aging test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Push-in connection
Conductor cross section flexible max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Connection
Feed-in stage
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
Nominal cross section
4 mm²
Rated surge voltage
6 kV
Maximum load current
63 A
Finger protection
guaranteed
Result of surge voltage test
Test passed
Tensile test result
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Value
1 mm²
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
45.7 mm
Conductor cross section AWG min.
20
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A4
Connection cross sections directly pluggable
0.5 mm² 16 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ETIM 4.0
EC000897
UNSPSC 6.01
30211811