3273734 Phoenix Contact Terminal Blocks
Part#:3273734
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 3
Nov 24, 2024
Distribution block, nominal current: 57 A, connection method: Push-in connection, Push-in connection, number of connections: 7, cross section: 0.5 mm² - 10 mm², AWG: 20 - 6, width: 27.9 mm, color: brown, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273734 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Nominal cross section 4 mm²
- Color brown
- Overvoltage category III
- Degree of pollution 3
- Maximum total current 63 A
- Nominal voltage UN 800 V
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Open side panel No
- Result of power-frequency withstand voltage test Test passed
- Tensile test result Test passed
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Result of surge voltage test Test passed
- Finger protection guaranteed
- Tight fit on carrier NS 35
- Insulating material PA
- Insulating material group I
- Nominal current IN 32 A
- Back of the hand protection guaranteed
- Width 27.9 mm
- ECLASS 5.0 27141120
- Number of connections 7
- Potentials 1
- Nominal cross section feed-in 10 mm²
- Rated surge voltage 6 kV
- Power frequency withstand voltage setpoint 2 kV
- Bending test turns 135
- Result of voltage-drop test Test passed
- Conductor cross section short circuit testing 10 mm²
- Ageing test for screwless modular terminal block temperature cycles 192
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock form Half-sine
- Shock duration 18 ms
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Connection Feed-in stage
- Connection method Push-in connection
- Conductor cross section AWG max. 10
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.2 mm²
- Internal cylindrical gage A4
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- Maximum load current 41 A
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test spectrum Service life test category 2, bogie-mounted
- Shock test result Test passed
- Number of shocks per direction 3
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 35/7,5 30.9 mm
- Conductor cross section solid min. 0.5 mm²
- Conductor cross section flexible min. 0.2 mm²
- Max. AWG conductor cross section, flexible 12
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm²
- Connection cross sections directly pluggable 0.5 mm² 6 mm² 20 10
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.0 27141121
- ECLASS 10.0.1 27141120
- ETIM 4.0 EC000897
- ECLASS 7.0 27141120
- UNSPSC 12.01 39121410
- UNSPSC 13.2 39121410
- Number of levels 1
- Flammability rating according to UL 94 V0
- Bending test rotation speed 10 rpm
- Setpoint 5 N
- Short circuit stability result Test passed
- Short-time current 1.2 kA
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Test duration per axis 5 h
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Length 45.7 mm
- Stripping length 10 mm ... 12 mm
- Conductor cross section solid max. 6 mm²
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.2 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Value 0.75 mm²
- ECLASS 11.0 27141120
- ECLASS 4.1 27141121
- ECLASS 6.0 27141100
- UNSPSC 6.01 30211811
- Result of flexion and pull-out test Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of aging test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 30g
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Connection in acc. with standard IEC 60998-2-2
- Conductor cross section AWG min. 24
- Min. AWG conductor cross section, flexible 24
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 9.0 27141120
- ETIM 7.0 EC000897
- ETIM 6.0 EC000897
- UNSPSC 20.0 39121410
- ECLASS 5.1 27141120
- ETIM 3.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- UNSPSC 19.0 39121410
- UNSPSC 11 39121410
- UNSPSC 21.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$5.42
Stock:
3
Select Qty:
$5.42
$5.42 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
