3273726 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection
  guaranteed
• Tight fit on carrier
  NS 35
• Result of temperature-rise test
  Test passed
• Nominal cross section feed-in
  10 mm²
• Overvoltage category
  III
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Setpoint
  5 N
• Result of thermal test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
Width
27.9 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Value
0.75 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
Bending test turns
135
Number of levels
1
Color
blue
Maximum load current
41 A
Maximum total current
63 A
Open side panel
No
Result of surge voltage test
Test passed
Tensile test result
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
32 A
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
10 mm²
Result of aging test
Test passed
Acceleration
30g
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Connection
Feed-in stage
Conductor cross section flexible min.
0.2 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of connections
7
Rated surge voltage
6 kV
Nominal voltage UN
800 V
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A4
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Short-time current
1.2 kA
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 4.1
27141121
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
UNSPSC 7.0901
39121410
Length
45.7 mm
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Stripping length
10 mm ... 12 mm
UNSPSC 18.0
39121410