3273696 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  12
• Potentials
  1
• Degree of pollution
  3
• Rated surge voltage
  6 kV
• Maximum total current
  63 A
• Nominal voltage UN
  800 V
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Power frequency withstand voltage setpoint
  2 kV
• Tight fit on carrier
  NS 35
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock form
  Half-sine
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Static insulating material application in cold
  -60 °C
• Width
  36.9 mm
• Stripping length
  10 mm ... 12 mm
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
Insulating material group
I
Overvoltage category
III
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Result of aging test
Test passed
Acceleration
30g
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
45.7 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Number of levels
1
Color
violet
Insulating material
PA
Maximum load current
41 A
Nominal current IN
32 A
Open side panel
No
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.72 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Result of voltage-drop test
Test passed
Setpoint
5 N
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141120
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
ECLASS 5.0
27141120
ETIM 4.0
EC000897
Conductor cross section solid max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141120
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
ECLASS 11.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Conductor cross section flexible max.
4 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141120
ETIM 3.0
EC000897
UNSPSC 19.0
39121410