3273694 Phoenix Contact Terminal Blocks

Product Details

• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Color
  black
• Maximum total current
  63 A
• Nominal voltage UN
  800 V
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Setpoint
  5 N
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  6 mm²
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test duration per axis
  5 h
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  45.7 mm
• Conductor cross section solid min.
  0.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.75 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
ECLASS 4.1
27141120
ETIM 3.0
EC000897
ETIM 6.0
EC000897
Potentials
1
Flammability rating according to UL 94
V0
Maximum load current
41 A
Back of the hand protection
guaranteed
Open side panel
No
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of flexion and pull-out test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of voltage-drop test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
30.9 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 21.0
39121410
Number of connections
12
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Overvoltage category
III
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Push-in connection
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Degree of pollution
3
Power frequency withstand voltage setpoint
2 kV
Tight fit on carrier
NS 35
Tensile test result
Test passed
Short-time current
0.72 kA
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Number of levels
1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
36.9 mm
ECLASS 5.0
27141120
Insulating material
PA
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
24
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Nominal cross section
4 mm²
Insulating material group
I
Nominal current IN
32 A
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section AWG max.
10
Min. AWG conductor cross section, flexible
24
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
ECLASS 4.0
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
UNSPSC 6.01
30211811