3273631 Phoenix Contact Terminal Blocks

Product Details

• Connection
  Feed-in stage
• Potentials
  1
• Nominal current IN
  32 A
• Bending test turns
  135
• Result of tight fit on support
  Test passed
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Short-time current
  1.2 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Shock duration
  18 ms
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Length
  58.1 mm
• Maximum load current
  63 A
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Result of voltage-drop test
  Test passed
• Result of aging test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 11.0
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
Maximum total current
63 A
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Setpoint
5 N
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
24
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
Flammability rating according to UL 94
V0
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
28.6 mm
Conductor cross section AWG max.
10
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Value
0.75 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Open side panel
No
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Height NS 15
30.4 mm
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A4
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
ECLASS 4.0
27141121
ECLASS 5.1
27141120
ETIM 7.0
EC000897
Number of connections
13
Rated surge voltage
6 kV
Nominal voltage UN
800 V
Connection in acc. with standard
IEC 60998-2-2
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Insulating material group
I
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Color
pink
Degree of pollution
3
Overvoltage category
III
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
UNSPSC 18.0
39121410
Nominal cross section feed-in
10 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Conductor cross section short circuit testing
10 mm²
Acceleration
30g
Number of levels
1
Insulating material
PA
Proof of thermal characteristics (needle flame) effective duration
30 s
UNSPSC 19.0
39121410