3273594 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  7
• Insulating material
  PA
• Nominal voltage UN
  800 V
• Nominal current IN
  57 A
• Result of surge voltage test
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Maximum load current
  57 A
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Setpoint
  5 N
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Connection cross sections directly pluggable
  0.5 mm² 16 mm²
• ECLASS 4.1
  27141121
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
Rated surge voltage
6 kV
Open side panel
No
Power frequency withstand voltage setpoint
2 kV
Short-time current
1.2 kA
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Nominal cross section feed-in
10 mm²
Degree of pollution
3
Maximum total current
63 A
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
10 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 15
30.4 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Number of levels
1
Nominal cross section
4 mm²
Overvoltage category
III
Bending test turns
135
Tensile test result
Test passed
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Color
blue
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of temperature-rise test
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/7,5
32.4 mm
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Connection
Feed-in stage
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
28.6 mm
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
8
Value
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
58.1 mm
Stripping length
12 mm ... 14 mm
Conductor cross section AWG max.
6
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410