3273590 Phoenix Contact Terminal Blocks

Product Details

• Short-time current
  0.72 kA
• Potentials
  1
• ECLASS 5.0
  27141120
• UNSPSC 13.2
  39121410
• UNSPSC 11
  39121410
• UNSPSC 19.0
  39121410
• Number of levels
  1
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Nominal current IN
  32 A
• Nominal voltage UN
  800 V
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
• Result of aging test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/7,5
  32.4 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Connection in acc. with standard
IEC 60947-7-1
Number of connections
18
Color
black/yellow
Overvoltage category
III
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
5 N
Conductor cross section short circuit testing
6 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
ECLASS 6.0
27141100
Max. AWG conductor cross section, flexible
12
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
ECLASS 10.0.1
27141120
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Insulating material group
I
Maximum load current
41 A
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock test result
Test passed
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 15
30.4 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Rated surge voltage
6 kV
Maximum total current
63 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Degree of pollution
3
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
28.6 mm
Length
58.1 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410