3273532 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Rated surge voltage
  6 kV
• Nominal current IN
  32 A
• Back of the hand protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Insulating material group
  I
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141120
• ECLASS 6.0
  27141100
• ETIM 2.0
  EC000897
• UNSPSC 12.01
  39121410
• Overvoltage category
  III
• Nominal voltage UN
  800 V
• Power frequency withstand voltage setpoint
  2 kV
• Bending test turns
  135
• Setpoint
  5 N
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
yellow
Nominal cross section
4 mm²
Degree of pollution
3
Maximum load current
41 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.72 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 4.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
UNSPSC 18.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
58.1 mm
Conductor cross section solid max.
6 mm²
Max. AWG conductor cross section, flexible
12
Internal cylindrical gage
A4
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 11
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141120
ECLASS 5.0
27141120
UNSPSC 6.01
30211811
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Insulating material
PA
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Number of connections
6
Finger protection
guaranteed
Result of aging test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Maximum total current
63 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Push-in connection
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
6 mm²
ASD level
6.12 (m/s2)2/Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
28.6 mm
Height NS 15
30.4 mm