3273522 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Flammability rating according to UL 94
  V0
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• ASD level
  6.12 (m/s2)2/Hz
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Length
  28.6 mm
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  8
• Conductor cross section flexible max.
  10 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Connection cross sections directly pluggable
  1 mm² 10 mm²
• Value
  1 mm²
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 11.0
  27141120
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 20.0
39121410
Number of connections
19
Nominal cross section
2.5 mm²
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of levels
1
Nominal cross section feed-in
6 mm²
Overvoltage category
III
Rated surge voltage
6 kV
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
orange
Insulating material
PA
Oscillation, broadband noise test result
Test passed
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
56.5 mm
Stripping length
10 mm ... 12 mm
Connection
Feed-in stage
Degree of pollution
3
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of thermal test
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Nominal voltage UN
450 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
22.7 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Maximum total current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
Insulating material group
I
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
UNSPSC 11
39121410
UNSPSC 12.01
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 4.0
27141121
UNSPSC 19.0
39121410