3273508 Phoenix Contact Terminal Blocks

Product Details

• Color
  red
• Insulating material group
  I
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Nominal voltage UN
  450 V
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Height
  22.7 mm
• Conductor cross section flexible max.
  10 mm²
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Value
  1 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 4.0
  27141121
• ECLASS 5.0
  27141120
• ETIM 4.0
  EC000897
• UNSPSC 19.0
  39121410
• Number of connections
  19
• Flammability rating according to UL 94
  V0
• Open side panel
  No
• Finger protection
  guaranteed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Connection method
Push-in connection
Conductor cross section solid min.
1 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section
2.5 mm²
Degree of pollution
3
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Width
56.5 mm
Connection in acc. with standard
IEC 60998-2-2
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Number of levels
1
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Maximum total current
57 A (with 10 mm² conductor cross section)
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Stripping length
10 mm ... 12 mm
Nominal cross section feed-in
6 mm²
Overvoltage category
III
Maximum load current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Number of shocks per direction
3
Length
28.6 mm
Conductor cross section AWG max.
8
Min. AWG conductor cross section, flexible
20
Internal cylindrical gage
A3
ECLASS 5.1
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Conductor cross section solid max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
UNSPSC 11
39121410
UNSPSC 20.0
39121410
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection
Feed-in stage
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410