3273500 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Color
  orange
• Insulating material group
  I
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Test duration per axis
  5 h
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  41 mm
• Height
  22.7 mm
• Conductor cross section AWG max.
  8
• Conductor cross section flexible max.
  10 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.5 mm²
• Max. AWG conductor cross section, flexible
  10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Nominal voltage UN
450 V
Back of the hand protection
guaranteed
Finger protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
28.6 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection
Feed-in stage
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 6.0
EC000897
Nominal cross section feed-in
6 mm²
Insulating material
PA
Overvoltage category
III
Maximum total current
57 A (with 10 mm² conductor cross section)
Open side panel
No
Oscillation, broadband noise test result
Test passed
Result of thermal test
Test passed
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
Connection method
Push-in connection
Conductor cross section flexible min.
0.5 mm²
Value
1 mm²
Internal cylindrical gage
A3
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 4.0
EC000897
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Connection in acc. with standard
IEC 60998-2-2
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Number of levels
1
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Number of connections
13
Conductor cross section solid min.
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Flammability rating according to UL 94
V0
Degree of pollution
3
ASD level
6.12 (m/s2)2/Hz
Connection cross sections directly pluggable
1 mm² 10 mm²
ECLASS 5.1
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410