3273499 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Nominal voltage UN
  450 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Width
  41 mm
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Insulating material
  PA
• Overvoltage category
  III
• ETIM 7.0
  EC000897
• ETIM 4.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 18.0
  39121410
• Number of connections
  13
• Nominal cross section feed-in
  6 mm²
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• UNSPSC 20.0
  39121410
Number of levels
1
Color
pink
Rated surge voltage
6 kV
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal current IN
41 A (with 6 mm² conductor cross section)
Finger protection
guaranteed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG min.
20
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
22.7 mm
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Value
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ETIM 6.0
EC000897
Maximum total current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Shock test result
Test passed
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Max. AWG conductor cross section, flexible
10
Connection
Feed-in stage
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
28.6 mm
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ETIM 3.0
EC000897
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ECLASS 9.0
27141120