3273486 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Rated surge voltage
  6 kV
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Connection method
  Push-in connection
• Conductor cross section solid min.
  1 mm²
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section AWG max.
  8
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 5.0
  27141120
• ETIM 3.0
  EC000897
• ECLASS 6.0
  27141100
• UNSPSC 7.0901
  39121410
• UNSPSC 18.0
  39121410
• Connection cross sections directly pluggable
  1 mm² 10 mm²
• Number of connections
  13
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Back of the hand protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Height
22.7 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Value
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Number of levels
1
Nominal cross section feed-in
6 mm²
Insulating material
PA
Nominal voltage UN
450 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Width
41 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 21.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
red
Overvoltage category
III
Maximum total current
57 A (with 10 mm² conductor cross section)
Open side panel
No
Finger protection
guaranteed
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock test result
Test passed
Number of shocks per direction
3
Length
28.6 mm
Conductor cross section flexible max.
10 mm²
Max. AWG conductor cross section, flexible
10
Connection
Feed-in stage
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Potentials
1
Degree of pollution
3
Insulating material group
I
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Shock duration
18 ms
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ECLASS 4.1
27141121
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410