3273470 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  7
• Overvoltage category
  III
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141121
• ETIM 4.0
  EC000897
• UNSPSC 11
  39121410
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 6.0
  27141100
• UNSPSC 6.01
  30211811
• UNSPSC 13.2
  39121410
• UNSPSC 21.0
  39121410
• UNSPSC 19.0
  39121410
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 11.0
  27141120
• ECLASS 7.0
  27141120
• ETIM 7.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Value
1 mm²
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ECLASS 9.0
27141120
Number of levels
1
Maximum load current
57 A (with 10 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Nominal cross section feed-in
6 mm²
Flammability rating according to UL 94
V0
Maximum total current
57 A (with 10 mm² conductor cross section)
Nominal voltage UN
450 V
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
28.6 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Color
brown
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Insulating material group
I
Finger protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
25.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Potentials
1
Insulating material
PA
Rated surge voltage
6 kV
Open side panel
No
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
22.7 mm
Conductor cross section solid max.
10 mm²
Conductor cross section solid min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Nominal cross section
2.5 mm²
Degree of pollution
3
Nominal current IN
41 A (with 6 mm² conductor cross section)
Back of the hand protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
Internal cylindrical gage
A3
Connection cross sections directly pluggable
1 mm² 10 mm²
ETIM 6.0
EC000897
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection
Feed-in stage