3273454 Phoenix Contact Terminal Blocks

Product Details

• Color
  violet
• Overvoltage category
  III
• Maximum load current
  32 A
• Back of the hand protection
  guaranteed
• Acceleration
  30g
• Test duration per axis
  5 h
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Stripping length
  8 mm ... 10 mm
• Max. AWG conductor cross section, flexible
  12
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Operating temperature
  -35 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141121
• ECLASS 7.0
  27141120
• ETIM 6.0
  EC000897
• Potentials
  1
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
22.7 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ETIM 3.0
EC000897
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section
2.5 mm²
Insulating material group
I
Nominal current IN
24 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of connections
18
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
28.6 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Maximum total current
48 A
Nominal voltage UN
450 V
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
46.9 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12