3273433 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Nominal current IN
  24 A
• Open side panel
  No
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  30g
• Shock test result
  Test passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  31.5 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Connection in acc. with standard
  IEC 60998-2-2
• Conductor cross section AWG max.
  12
• Max. AWG conductor cross section, flexible
  12
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141121
• ECLASS 4.1
  27141121
• Number of connections
  12
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Test spectrum
  Service life test category 2, bogie-mounted
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
UNSPSC 12.01
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Insulating material group
I
Overvoltage category
III
Maximum total current
48 A
Oscillation, broadband noise test result
Test passed
Finger protection
guaranteed
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height
22.7 mm
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
ETIM 3.0
EC000897
Nominal voltage UN
450 V
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Maximum load current
32 A
Back of the hand protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
28.6 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
UNSPSC 19.0
39121410
Potentials
1
Ambient temperature (assembly)
-5 °C ... 70 °C
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Flammability rating according to UL 94
V0
Number of levels
1
Color
pink
Insulating material
PA
ETIM 7.0
EC000897