3273432 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  12
• Flammability rating according to UL 94
  V0
• Maximum load current
  32 A
• Oscillation, broadband noise test result
  Test passed
• Back of the hand protection
  guaranteed
• Test spectrum
  Service life test category 2, bogie-mounted
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection method
  Push-in connection
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• Operating temperature
  -35 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 6.0
  27141100
• ECLASS 7.0
  27141120
• Number of levels
  1
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Open side panel
  No
Acceleration
30g
Shock form
Half-sine
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
22.7 mm
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
violet
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
450 V
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 4.0
27141121
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
Potentials
1
Overvoltage category
III
Nominal current IN
24 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
28.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.14 mm²
Nominal cross section
2.5 mm²
Insulating material
PA
Insulating material group
I
Maximum total current
48 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test duration per axis
5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
31.5 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ETIM 6.0
EC000897
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
UNSPSC 19.0
39121410
UNSPSC 13.2
39121410