3273428 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Nominal voltage UN
  450 V
• ASD level
  6.12 (m/s2)2/Hz
• Shock form
  Half-sine
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Connection in acc. with standard
  IEC 60998-2-2
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Connection cross sections directly pluggable
  0.34 mm² 4 mm² 24 12
• ECLASS 10.0.1
  27141120
• ECLASS 4.1
  27141121
• ECLASS 7.0
  27141120
• UNSPSC 11
  39121410
• UNSPSC 20.0
  39121410
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Open side panel
  No
Back of the hand protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
31.5 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Overvoltage category
III
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Height
22.7 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Color
white
Finger protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
28.6 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Insulating material group
I
Maximum total current
48 A
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Rated surge voltage
6 kV
Maximum load current
32 A
Number of connections
12