3273398 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material group
  I
• Maximum load current
  32 A
• Open side panel
  No
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Potentials
  1
• Number of connections
  6
• Insulating material
  PA
• Overvoltage category
  III
• Maximum total current
  48 A
• Nominal voltage UN
  450 V
• Finger protection
  guaranteed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Color
  red
• Degree of pollution
  3
• Back of the hand protection
  guaranteed
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 5.1
27141120
Acceleration
30g
Nominal cross section
2.5 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ETIM 4.0
EC000897
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
Nominal current IN
24 A
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height
22.7 mm
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
12
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
16 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Length
28.6 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Shock duration
18 ms
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
UNSPSC 11
39121410
UNSPSC 12.01
39121410